Sealer Products

Click on a category below to be taken to those specific SEALER PRODUCTS

Seam Sealer (Fusor)

 

Item

Name

Description

SEAM SEALER
Back to Top

3M™ Ultrapro™ Autobody Sealant, 08300, Tan, 1/10 gal cartidge

MSDS

TDS

Tan heavy bodied seam sealer. Quick skinning, fast curing, flexible sealer. Can be used wherever heavy bodied seam sealers are needed. High solids and low shrinkage. Ideal seam sealer where time and speed are important. Paintable in 45 min.

3M™ Ultrapro™ MSP Seam Sealer, 08369, White, 310 mL Flexpack

MSDS

TDS

High quality, heavy-bodied, general purpose, moisture-curing seam sealers that are designed for interior and exterior body joints. Adheres well to primed surfaces except acrylic lacquer.

Tack free in 30 minutes and immediately paintable up to 72 hours. Use with 3M™ Flexible Package Applicator Gun, part number 08398.

3M™ Ultrapro™ MSP Seam Sealer, 08370, Gray, 310 mL Flexpack

MSDS

TDS

High quality, heavy-bodied, general purpose, moisture-curing seam sealers that are designed for interior and exterior body joints. Adheres well to primed surfaces except acrylic lacquer.

3M™ Fast N Firm™ Seam Sealer, 08505, 1/10 Gallon (US) cartridge

MSDS

TDS

Firm setting product for sealing interior and exterior joints. Adheres well to clean, bare metal, primed metal and paint surfaces. Skins over quickly. Low shrinkage. Can be painted within 30 minutes. Excellent tooling and sanding properties.

3M™ Heavy Drip-Chek™ Sealer, 08531, 5 oz tube

MSDS

TDS

Heavy-based sealer especially designed for verticle seams. Heavier bodied consistancy. Up to 1/8 inch can be applied easily. This product weathers well and does not deteriorate under sunlight.

Excellent adhesion to metal, paint, glass, rubber, etc. Resists gas and oil.

3M™ Brushable Seam Sealer, 08656, 1 Quart (US)

TDS

Designed to seal sheet metal overlap joints that have been spotwelded, riveted, or bolted together. Can be painted when dry. Remains flexible and resistes oil, fuel and other automotive fluids.

Use for sealing floor pans, fire walls, trunk seams, shock absorber mounting towers, around wheelwells, fuel filler splash pans and around headlight and taillight openings.

019 - BARE METAL BRUSHABLE SEAM SEALER

TDS

LORD Fusor 019 reproduces a brushed OEM/factory seam seal appearance. Easy to use, this acrylic adhesive reduces cycle time because it is faster to apply when compared to traditional seam sealing procedures. Further, because it can be bonded directly to bare metal, Fusor 019 eliminates the time-intensive primer and pre-treatment steps, saving up to 50 minutes per seam sealing procedure. LORD Fusor 019 is paintable after application. Its proprietary color-changing formula tells users that the product is curing properly and when it is ready for painting.

Designed to easily reproduce the OEM appearance of repaired seams and surfaces, this new product is perfect for many demanding applications including rear-body panels, tail-light pockets, under hood area, aprons, strut towers, core supports and floor pan areas. Further, Fusor 019 contains phosphatizing agents, which protect metal from corrosion with no additional special primers or pre-treatment necessary.

121 - FLEXIBLE FOAM SEALER (SUPER FAST)

MSDS (p. 1. p. 2)

TDS

LORD Fusor® 121/124 flexible foam can be used for sound deadening, sealing and filling of door skins to crash bar, hood panel to supports, trunk panel to supports and gas tank filler area.

Substrates

Primed or painted metals and all plastics.

OEM Approvals

• Ford: Recommended in bedside skin replacement TSBs

Features and Benefits

• Fusor 121 = 10.1 oz (300 ml)
• Fusor 124 = 1.7 oz (50 ml)
• Matches OEM sound deadening foams
• Retains its memory with no shrinkage
• Expands to 10 times its size
• Will not oil can
• Will not absorb moisture or cause corrosion

Applications

Sound deadening, sealing and filling of: door skins to crash bar, hood panel to supports, trunk panel to supports and gas tank filler area

122EZ - SELF LEVELING SEAM SEALER (FAST)

MSDS (p. 1, p. 2)

TDS

LORD Fusor® 122EZ self-leveling seam sealer can be used for drip rails, trunks, core support to aprons, roof seams and quarter panel to rear deck.

Substrates

Can be used over fully cured acid-etch primers, urethane primers and epoxy primers.

OEM Approvals

• Ford: Meets sealing spec; Recommended in sealing TSBs

Features and Benefits

• Fusor 122EZ = 10.1 oz (300 ml)
• Perfectly matches factory flow-grade seams
• No tooling required
• Permanently flexible
• Sandable
• Color changes to indicate cure

Applications

Drip rails, trunks, core support to aprons, roof seams and quarter panel to rear deck.

123 - SEAM SEALER FAST

MSDS (p. 1, p. 2)

TDS

Applications: Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where fast work time is desired.

Substrates: Can be used over epoxy and urethane primers (when using acid-etch primers, use 123EZ).

Features & Benefits:
• Duplicates factory appearance
• Gets the job done in 10 minutes
• Bright white color

ADVANTAGES
FLEXIBLE – A sealer and foam available to match every OEM seam.
CURES FAST – Paintable almost immediately.
EFFICIENT – Up to 67% more adhesive than competitive products.
SIMPLE – Easy to tool/spread without adding solvents or thinners.
RELIABLE – Perfect factory match.
ADAPTABLE – A permanently flexible product with no shrinkage.
OEM RECOMMENDED – Featured in the I-CAR Industry Training Alliance/Fusor 001 training course.
COST-EFFECTIVE – Can be charged to the repair order. Available in job-size cartridges.

123EZ - SEAM SEALER MEDIUM

MSDS (p. 1, p. 2)

TDS

 

Applications:
Duplicating factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non sag cosmetic seam sealer is required and where longer work time is desired.

Substrates:
Can be used over fully cured acid-etch primers, urethane primers and epoxy primers.

Features & Benefits:
• Duplicates factory appearance
• Longer work time
• Sandable

ADVANTAGES
FLEXIBLE – A sealer and foam available to match every OEM seam.
CURES FAST – Paintable almost immediately.
EFFICIENT – Up to 67% more adhesive than competitive products.
SIMPLE – Easy to tool/spread without adding solvents or thinners.
RELIABLE – Perfect factory match.
ADAPTABLE – A permanently flexible product with no shrinkage.
OEM RECOMMENDED – Featured in the I-CAR Industry Training Alliance/Fusor 001 training course.
COST-EFFECTIVE – Can be charged to the repair order. Available in job-size cartridges.

129 - CONTROLLED FLOW SEAM SEALER FAST

MSDS (p. 1, p. 2)

TDS

Applications:
Excellent for roof channels, door seams, drip rails and truck bed floor seams and trunk seams.

Substrates:
Can be used over epoxy and urethane primers and fully cured acid-etch primers.

Features & Benefits:
• Provides smooth continuous beads with no gun lines
• No tooling required for factory look
• Sandable

ADVANTAGES
FLEXIBLE – A sealer and foam available to match every OEM seam.
CURES FAST – Paintable almost immediately.
EFFICIENT – Up to 67% more adhesive than competitive products.
SIMPLE – Easy to tool/spread without adding solvents or thinners.
RELIABLE – Perfect factory match.
ADAPTABLE – A permanently flexible product with no shrinkage.
OEM RECOMMENDED – Featured in the I-CAR Industry Training Alliance/Fusor 001 training course.
COST-EFFECTIVE – Can be charged to the repair order. Available in job-size cartridges

800EZ - FACTORY MATCH URETHANE SEALER/ADH

MSDS

TDS

Applications:
Duplicates factory look on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams and brushed seams and any other application in which a non-sag cosmetic seam sealer is required.

Substrates:
Can be used over epoxy and urethane primers.

Features & Benefits:
No shrinkage, no cracking
New and improved non-sag formula – will hold brush strokes for the OEM look
Available in neutral (cartridges and Chub pack) and black (cartridges)
Tools easily with water

ADVANTAGES
FLEXIBLE – A sealer and foam available to match every OEM seam.
CURES FAST – Paintable almost immediately.
EFFICIENT – Up to 67% more adhesive than competitive products.
SIMPLE – Easy to tool/spread without adding solvents or thinners.
RELIABLE – Perfect factory match.
ADAPTABLE – A permanently flexible product with no shrinkage.
OEM RECOMMENDED – Featured in the I-CAR Industry Training Alliance/Fusor 001 training course.
COST-EFFECTIVE – Can be charged to the repair order. Available in job-size cartridges.

803EZ - FACTORY MATCH URETHANE/SEALER ADHESIVE

MSDS

TDS

Applications:
Duplicates factory look on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams and brushed seams and any other application in which a non-sag cosmetic seam sealer is required.

Substrates:
Can be used over epoxy and urethane primers.

Features & Benefits:
No shrinkage, no cracking
New and improved non-sag formula – will hold brush strokes for the OEM look
Available in neutral (cartridges and Chub pack) and black (cartridges)
Tools easily with water

ADVANTAGES
FLEXIBLE – A sealer and foam available to match every OEM seam.
CURES FAST – Paintable almost immediately.
EFFICIENT – Up to 67% more adhesive than competitive products.
SIMPLE – Easy to tool/spread without adding solvents or thinners.
RELIABLE – Perfect factory match.
ADAPTABLE – A permanently flexible product with no shrinkage.
OEM RECOMMENDED – Featured in the I-CAR Industry Training Alliance/Fusor 001 training course.
COST-EFFECTIVE – Can be charged to the repair order. Available in job-size cartridges.

804 - SPRAYABLE SEAM SEALER GRAY

MSDS

TDS

Applications:
create flexible textured seams including floor pan, trunk pan, strut tower, exterior and truck bed seams. Restore rocker panel chip guard texture and trunk area texture.

Substrates:
Any scuffed primed surface including metal and SMC/fiberglass.

Features & Benefits:
• Gray color, easy to paint over
• Paintable immediately or up to four days
• Perfectly duplicates OEM textured seams
• Extremely flexible – won't crack or peel
• Perfectly matches all OEM seams and textures with use of Fusor 312 Dispense Gun

ADVANTAGES
FLEXIBLE – A sealer and foam available to match every OEM seam.
CURES FAST – Paintable almost immediately.
EFFICIENT – Up to 67% more adhesive than competitive products.
SIMPLE – Easy to tool/spread without adding solvents or thinners.
RELIABLE – Perfect factory match.
ADAPTABLE – A permanently flexible product with no shrinkage.
OEM RECOMMENDED – Featured in the I-CAR Industry Training Alliance/Fusor 001 training course.
COST-EFFECTIVE – Can be charged to the repair order. Available in job-size cartridges.

PAINT SEALER
Back to Top

DuPont™ 1986S™ Velvaseal® Acrylic Sealer ( 3/2007)

MSDS

TDS

Velvaseal® is a ready-to-spray acrylic sealer with good holdout and adhesion. It is designed for spot and panel repairs, and
can also be used over factory primers on replacement parts.

DuPont™ 7710S™ / 7740S™ / 7770S™ ChromaSeal® 2K Urethane ValueShade® Sealer ( 4/2009)

MSDS

TDS

DuPont™ ChromaSeal® 7710S™/7740S™/7770S™ 2K Urethane ValueShade® Sealer is a two component, highperformance sealer for premium-quality spot, panel and overall repairs. It provides excellent leveling and topcoat holdout with fast flash for productivity. This sealer allows you the option of "finesse" sanding for improved final finish.

MISCELLANEOUS
Back to Top

3M™ All-Around Autobody Sealant, 08500, 1/10 gal cartridge

TDS

 

White, easy to apply sealant that is used fo sealing interior and exterior autobody joints and seams. Applies easily and can be smoothed to a featheredge with a wet finger and sets to a firm, tough, rubber-like water resistant bead.

This sealant can be painted in 30 minutes, has easy water cleanup and will not harm paint.

3M™ Clear Auto Sealer, 08551, 5 fl oz (US)

MSDS

TDS

Clear, fast drying, sealant that stays flexible and is color stable. This product is used for sealing leaks in windshields, backlites, reveal moldings, truck ornaments, taillights and other small seams on the auto body.

3M™ Window-Weld™ Round Ribbon Sealer, 08610, 1/4 in x 15 ft Kit

MSDS

Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite.

3M™ Window-Weld™ Round Ribbon Sealer, 08610, 5/16 in x 15 ft Kit

MSDS

Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite.

3M™ Window-Weld™ Round Ribbon Sealer, 08610, 3/8 in x 15 ft Kit

MSDS

Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite.

3M™ Super Silicone Seal, 08662, Black, 3 oz tube

MSDS

TDS

A paste-like, one-component black material which cures to a tough, rubbery solid when exposed to moisture in the air. It will adhere to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces, and many plastics.

Will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.

3M™ Fast Cure Auto Glass Urethane, 08690, 10.5 fl oz cartridge

MSDS

TDS

One part moisture curing auto glass urethane. One of the fastest curing one part urethane on the market. Ideal for those applications that require a fast curing one part auto glass urethane.

Officially licensed by NASCAR and approved by Carlite by Visteon.

RUST-SEAL

MSDS

TDS

Transforms rust leaving a tough, permanent, black protective coating. RUST-SEAL can be left exposed or may be topcoated with enamels, lacquers or urethanes.